Skip to content

Cart

Your cart is empty

Article: Why Do Glasses Leave Marks on Your Nose? How to Fix the Fit

Red marks on your nose? It's the nose pads, not your skin

Why Do Glasses Leave Marks on Your Nose? How to Fix the Fit

Glasses leave marks on your nose when their weight presses on a few small points instead of spreading across the pads. That happens when the pads or bridge do not match the angles of your nose, when the frame sits too low, or when the frame has been squeezed tight to stop it slipping. Reshaping or replacing the nose pads usually fixes it.

Part 3 of our Lunettes Fittingology series.

Key takeaways

  • Marks are a pressure problem, not a skin problem.
  • Your nose has three angles, and good pads mirror all three.
  • Plastic frames with a low bridge can often be fitted with nose pads.

Why do my glasses dig into my nose?

You take your glasses off and there they are: two red ovals, sometimes a dent that lasts an hour. Some people get sore patches. Some start wearing their glasses less.

Think of it like standing on a pebble. The same weight hurts on one small point and disappears when it spreads across your whole foot. Glasses work the same way on your nose.

What are the three angles of the nose?

Every nose meets a frame at three angles, and the pads need to match each one.

Angle What it describes Typical starting range
Splay angle How the sides of the nose open outwards Around 20 degrees
Crest angle How the bridge slopes from top to bottom Around 25 to 30 degrees
Frontal angle How the pads tilt when seen from the front Around 10 to 15 degrees

These are our usual starting points, not fixed rules. Every nose is different, which is exactly why off-the-shelf pads so often leave marks.

Try this now: look at the marks after a few hours. Marks at the top edge mean the pads are tilted wrong. Marks at the bottom mean the frame is sitting too low. Deep marks on both sides usually mean the frame is too tight.

What if I have a low nose bridge?

A low or flat nose bridge is common, including in many Asian faces. Plastic frames are usually cut for a higher bridge, so they drop until they rest on the sides of the nose and the cheeks.

Adding adjustable nose pads lifts the frame back to where it should sit.

Original moulded bridge on a translucent plastic glasses frame before modification
Before: a moulded plastic bridge with nowhere to adjust.
The same glasses frame fitted with metal arms and two clear adjustable nose pads
After: the same frame fitted with adjustable nose pads in our workshop.

What usually gets missed?

A quick fix often swaps the pads for softer ones or widens them a little. Softer pads help for a while, but if the angles are still wrong, the marks come back. The fix lasts when the pads are angled to your nose first and the frame height is checked second.

For everyday causes and quick fixes, see our guide Why Are Your Glasses Pinching Your Nose?

How do we fix nose marks?

  1. We look at where your marks are and how the frame sits.
  2. We set the pads to your splay, crest and frontal angles.
  3. We check the frame height so your eyes sit in the right part of the lens.
  4. For plastic frames that sit too low, we discuss adding nose pads or custom acetate pads.
  5. We finish with a pull test so the frame stays put without squeezing.

Frequently Asked Questions

Are silicone nose pads better?

Silicone pads grip well and feel soft, but they cannot fix a wrong angle. The angle matters more than the material.

Can nose pads be added to plastic glasses?

Often, yes. Whether it suits your frame depends on its material and design, so it needs to be checked in person.

Are nose marks harmful?

Usually they are just a sign of poor fit. If you notice broken skin or a sore that does not heal, see your GP.

Next in the series: Part 4 explains why glasses hurt behind your ears and how the temple bend should follow your bone. Stay tuned.

Book Your Signature Fitting in Surry Hills

If your glasses leave marks every day, the pads are almost certainly fixable. Bring them in and we will match them to your nose.

Book a complimentary 15-minute Signature Fitting

Due for an eye check too? Book a comprehensive eye examination.

Lunettes Art Lab

Read more

From flat sheet to frame: how acetate glasses are made
Acetate Frames

How Are Acetate Glasses Made? From Acetate Sheet to Finished Frame

Acetate glasses are made by cutting a frame front from a sheet of acetate, then filing, shaping, sanding, polishing and fitting temples and nose pads by hand. In our DIY Eyewear Workshop you can do...

Read more
New progressives feel weird? How long adapting really takes
Lens Personalisation

How Long Does It Take to Get Used to Progressive Lenses?

Most people get used to progressive lenses within one to two weeks of regular wear, sometimes longer for a first pair. If they still feel wrong after that, the fit or the lens design usually needs ...

Read more